Table of Contents
Advertisement
Playing a disc
SD-AT50H
DX-AT50H
ENGLISH
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
E-27
1
Press the ON/STAND-BY button on the AV control unit or the re-
mote control to turn the power on.
(DVD/CD)
When the ON/STAND-BY button on the DVD player is pressed, the function will
be automatically switched to DVD.
2
When the function is not DVD, press the
FUNCTION button to set it to "DVD".
" The startup screen appears.
" Select "DVD" when playing an audio CD.
" The same operation can be performed by press-
ing the
3
Press the
" Place the disc on the disc tray, label side up.
" If the display window of the DVD player is placed on the lower side, a disc may
fall or may not be ejected.
4
Press the
If the disc you are using supports auto start, it starts playing automatically [even
if you do not press the
5
If you cannot start playback in step 4, press the
(DVD/CD)
Note:
When the DVD player is turned on or the input source is switched to "DVD", no oper-
ation will be accepted for 5 seconds as the DVD player is proceeding the initial set-
ting.
button on the remote control.
button to open the disc tray.
Label side
Disc tray
Slide the disc into the hooks.
(An 8 cm (3") disc cannot be played.)
button to close the disc tray.
(DVD/CD) button], as soon as you close the disc tray.
02/8/28
SD-AT50H(H)E3.fm
(DVD/CD) button.
Advertisement
Table of Contents
