Table of Contents
Advertisement
SETTING UP YOUR DVD PLAYER
Connecting to Audio Equipment
Connecting the Player to audio equipment provides normal stereo sound.
Playing 2 channel audio
C C Analogue audio connection
C C Digital audio connection
You can make this connection using a coaxial digital cable.
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is digitally
recorded by connecting the Player directly to a digital recorder (such as an MD player), the music may be recorded continu-
ously and track numbers may be lost.
C C Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
•
Audio CD
Audio CD discs can be transferred digitally to other equipment such as an MD recorder, play the disc as you would
normally with the audio mode set to "L+R" and use the connection shown above. Audio CD's recorded in the DTS format
cannot be transferred digitally or via analogue.
•
DVD
DVD's recorded in Dolby Digital (5.1 channel), Dolby surround (Pro Logic), DTS or MPEG Audio cannot be connected
digitally to external recording equipment such as an MD recorder.
It may be possible to record Dolby Digital or MPEG Audio via a digital connection if the DVD player output is set to PCM
and down mix is set to ON (see page 19 "Audio Settings"). Analgue recording is possible but not for DTS recorded audio.
DVD discs with linear PCM audio should play normally.
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/ MPEG
Audio surround processor to your Player's coaxial digital jack provides richer and more powerful audio play.
C C Digital connection to a processor or amplifier with a coaxial digital input jack
You can make this connection using a coaxial digital cable.
NOTES:
•
This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial digital
input jack.
•
ANALOG AUDIO OUT and AV (TV) of the DVD player are not available on the DTS audio.
(Red)
(White)
R
L
DIGITAL
VIDEO
S-VIDEO
AUDIO OUT
VIDEO OUT
AUDIO cable
(commercially available)
To amplifier
audio input jacks
R
L
DIGITAL
VIDEO
S-VIDEO
AUDIO OUT
VIDEO OUT
To COAXIAL
Coaxial digital cable
DIGITAL OUT
(commercially available)
jack
DIGITAL IN
To coaxial digital
input jack
COAXIAL
R
L
AV (TV)
DIGITAL
VIDEO
S-VIDEO
AUDIO OUT
VIDEO OUT
To COAXIAL
Coaxial digital cable
DIGITAL OUT jack
(commercially available)
To coaxial digital
input jack
To AUDIO
OUT jacks
AV (TV)
ANALOG INPUT
(White)
L
R
(Red)
AV (TV)
Audio equipment with
coaxial digital input jack
DVD Player
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or
DIGITAL IN
amplifier
COAXIAL
– 10 –
DVD Player
Amplifier of stereo system, etc.
Jack and Plug Colours
Audio Left: White
Audio Right: Red
DVD Player
EN
Advertisement
Table of Contents
