Install The Air Conditioner - Sharp GX-X18JR Installation And Operation Manual

INSTALLATION INSTRUCTIONS

Install the air conditioner

1 Attach the articulation on the lifting bolt with the two nuts and washers.
• Use the washer fixed board to prevent washer from falling.
2 Use the model paper.
• Refer to the model paper about the dimension of ceiling opening.
• The central mark of the ceiling opening is marked on the install cardboard.
• Install the install cardboard on the unit by screws (4 piece).
Center of the ceiling opening
3 Adjust the unit to the suitable install place.
4 Check if the unit is horizontal.
• Inner drainage pump and float switch are included in the indoor unit, check if 4 angle of every
unit are horizontal by water level. (If the unit is slant toward the opposite of the water flow,
there may be malfunction of the float switch and lead water drop.)
5 Remove the washer fixed board and tighten the nut on it.
6 Remove the model paper.
GREE_cassette_eng.indd 22
Nut (local parts)
Washer (attachment)
Articulation
Tighten (double nuts)
Screw (attachment)
Water level
Insert
Washer fixed board
(attachment)
Model paper(attachment)
Screw (attachment)
Polyethylene tube
E-22
08.10.28 11:42:45 AM