Sleep Mode Operation; Optimum Operation - Sharp GX-X18JR Installation And Operation Manual

SLEEP mode operation

SWING FAN
OPER
SLEEP AIR
LIGHT HUMID
TIMER ON TIMER OFF ANION SAVE
MODE ON/OFF
• When SLEEP operation is set during cooling or dry operation, the temperature setting rises
1˚C in 1 hour and 2˚C in 2 hours.
• When SLEEP operation is set during heating operation, the temperature setting drops 1˚C
in 1 hour and 2˚C in 2 hours.
• Indoor fan motor runs at low speed.

OPTIMUM OPERATION

ADJUST THE ROOM TEMPERATURE PROPERLY.
• Adjust the room temperature properly for a comfortable environment.
NEVER PLACE ANYTHING UNDER THE INDOOR UNIT THAT IS TO BE KEPT DRY.
• Water may drop from the indoor unit when the humidity is over 80% or when the drainage
outlet is clogged.
DISCONNECT THE POWER CORD WHEN THE UNIT IS NOT USED FOR AN EXTENDED
PERIOD OF TIME
• The indoor unit still consumes a small amount of power when it is not operating.
BLOCK DIRECT SUNLIGHT AND PREVENT DRAFTS
• Blocking direct sunlight during cooling operation will reduce power consumption.
• Close the windows and doors during cooling operation.
GREE_cassette_eng.indd 15

P ress the ON/OFF button.
2
P ress the MODE button to select
or mode.
3
P ress the SLEEP button to set SLEEP
3
operation.

2
E-5
,
08.10.28 11:42:44 AM