Table of Contents
Advertisement
VCR OPERATION
To correct timer programmes
If you want to correct an automatic timer after you finished
setting programme,
1
1
3
Repeat steps
to
2
Select the setting you want to change using s or B.
3
Enter the correct numbers using K or L, then press B.
4
Press MENU to exit.
5
Press TIMER ON/OFF to return to timer stand-by mode.
To cancel or check the start/end time
1
1
2
Repeat steps
to
2
Select a programme number you want to check using K
or L. The details of selected programme appears on the
TV screen. You may cancel the entire programme by
pressing s.
3
Press the MENU button to exit.
To avoid overlap of TIMER programmes ...
A timer programme will not work while another programme is
under execution.
Programme 1
Programme 2
Programme 3
9:00
Hints for Timer Recording
• If there is a power failure or the VCR/DVD is unplugged for
more than 1 hour, clock and all timer settings will be lost.
• If a tape runs out before a timer recording is finished, the
unit ejects the tape and switches into DVD mode automati-
cally. Press TIMER ON/OFF to active VCR function.
• Once the unit goes into Timer-standby mode, no VCR func-
tions are available until TIMER ON/OFF is pressed. (OUT
PUT on the front panel and VCR on the remote control will
not function.)
• Press TIMER ON/OFF to activate VCR functions after your
timer recording is finished.
• DVD functions are available during Timer-standby mode and
Timer recording. You don't have to stop your timer recording.
Auto Return
If there are any remaining programmes including Daily,
Everyday and Weekly, AUTO RETURN will not operate.
1
Press VCR, then MENU.
2
Press K or L repeatedly to point to SET UP, then press B.
3
Press K or L to point to AUTO RETURN, then press B.
[ON] will appear next to AUTO RETURN.
4
Press MENU.
Watch the Recorded TIMER PROGRAMME
Press OPERATE to turn on the VCR/DVD, then press PLAY.
Quick-Find
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• The tape must be fully rewound.
1
Press VCR, then QUICK-FIND.
To skip to the beginning of next programme
Press QUICK-FIND.
To view at normal speed
Press PLAY. The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
progress, press STOP.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the begin-
ning. After rewinding finishes, the VCR/DVD will eject
the tape.
in the "Timer Recording" section.
in the "Timer Recording".
10:00
11:00
Index Search
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if STILL/PAUSE is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
1
Press SEARCH MODE.
2
Press K or L repeatedly until the number of pro-
grammes that you want to skip appears.
3
Press s or B.
The VCR/DVD begins rewinding or fast forwarding to the
beginning of desired programme.
• When the preset programme is reached, the VCR/DVD
will start playback automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
2
from steps
mode will be cancelled.
• To exit the Index Search mode, press MENU in step
2
. Or press STOP after step
Time Search
If a tape includes both programmes recorded in the PAL sys-
tem and ones recorded in the NTSC system, this function
may not be operated correctly.
1
Press VCR, then SEARCH MODE twice.
2
Press K or L repeatedly until the desired time appears.
3
Press s or B.
The VCR/DVD begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR/DVD will start playback auto-
matically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
2
from steps
will be cancelled.
• To exit the Time Search mode, press MENU in step
Or press STOP after step
Recording from DVD to VCR
1
To activate DVD function, press DVD.
2
Insert a non-copyright-protection DVD, then press PAUSE
at the point where you want to start recording.
3
Press VCR, then insert a tape with its erase-prevention
tab in place. Make sure the VCR function is in Stop mode
after you find your recording point.
4
Press TAPE SPEED/SYSTEM to choose your recording
speed. "SP" or "LP" appears on the front panel display.
5
Press 0, 0, 4, with the numerical buttons, then "disc"
briefly appears on the front panel display.
6
Press REC/OTR.
• The recording of the DVD's paused image selected at
2
step
starts.
7
Press DVD, then press PLAY.
• The recording of the DVD's moving image starts.
8
To stop recording, press VCR, then STOP.
– 17 –
3
to
. Otherwise the Index Search
3
.
3
to
. Otherwise the Time Search mode
3
.
2
.
EN
Hide quick links:
Advertisement
Table of Contents
