Setting The Time Range For Hourly Reports (#2619); Rs-232C Channel Assignment (#2690) - Sharp ER-A440S Instruction Manual

Setting the time range for hourly reports
You can set the time range for an hourly report .
Procedure
2619
*A: Time range
To set the time range to 30 minutes (in the 24-hour system), enter 0.
To set the time range to 60 minutes (in the 24-hour system), enter 1.
BC: Starting time (hour = 00 to 23)
Example
Note
To perform this setting, an hourly Z report (# 160) must be done.
RS-232C channel assignment
Your machine is equipped with two RS-232C interfaces. If you use the on-line communication function and/or
the barcode reader, the channel number of each RS-232C interface must be programmed by using the following
procedure.
To realize the on-line communication and/or to use the barcode reader, consult your dealer.
Procedure
2690
*P: 1
**
Item:
A Channel no. for the ON-LINE
communication
B to D Always enter 0.
*P: 2
**
Item:
A Channel no. for the barcode reader
B to D Always enter 0.
*P: 3 (ABCD: Not used. Always enter 0.)
Note
Never enter any number other than 0, 1 and 8.
82
When A through C are all zeros
*
ABC
Key operation
2619
107
When A through D are all zeroes
*P
1 to 3
PGM 2
2690
PGM 2
**ABCD
Selection:
Not connected
Standard port 2
Standard port 1
Selection:
Not connected
Standard port 2
Standard port 1
2619
Print
Entry:
0
1
8
0
Entry:
0
1
8
0