Setting The Time Range For Hourly Reports (#2619); Programming Of Power Save Mode (#2689) - Sharp ER-A520 Instruction Manual

Setting the time range for hourly reports
You can set the time range for the hourly report.
Procedure
.
2619
*A: Time range
To set the time range to 30 minutes (in the 24-hour system), enter 0.
To set the time range to 60 minutes (in the 24-hour system), enter 1.
BC: Starting time (hour = 00 to 23)
Example
Setting the time range to 60 minutes with the starting time being set at 7:00
To change this setting, an hourly Z report (#160) must be taken prior to the changes.
Note
Programming of power save mode
Procedure
.
2689
* Item:
A Entering power save mode when time is
displayed.
BCD Time (min.) to entering power save mode
since no operation is made.
Example
When A thru C are all zeros.
@ @
*
A B C
Key operation
. @
2619
a
107
@ @
*
A B C D
Key operation
. @
2689
a
0030
PGM 2
a
2689
PGM 2
a
Selection:
Enable
Disable
(999: The power save mode is inhibited.)
2619
Print
Entry:
0
1
1 through 254 (min.)
Print
161