Virtual Dolby (Qsurround) Selection - Sharp DV-620S Operation Manual

DVD Playback for Special Functions
DVD
DVD

VIRTUAL DOLBY (QSURROUND) Selection

This function allows you to enjoy a "surround sound" effect when you
are using an analogue connection (using AUDIO OUT on the Player)
to 2-channel audio equipment (TV, etc.).
Preparation:
• When you use the VIRTUAL DOLBY (QSURROUND) function, set
the "COMPRESSION" setting in "AUDIO SETUP" to "OFF" (see
page 30).
Refer to the table below about the types of audio format with which
VIRTUAL DOLBY (QSURROUND) works.
Types of audio recorded on the disc
Dolby Dolby
Digital Pro Logic
1
While a disc is playing, press VIRTUAL to display the current
setting.
• Pressing VIRTUAL toggles the setting between "
" OFF".
• When VIRTUAL is on,
display.
2
ON" is displayed, press \ or | .
While the "
• The level selection indicator that shows the current level
appears.
• If no button is pressed within 10 seconds, the level selection
indicator goes off.
3
Use \ or | to change the level.
Press \. Press |.
ON
• Pressing ENTER makes the level indicator go off.
• If no change is made within 10 seconds after the level is set,
the level indicator goes off.
• VIRTUAL DOLBY (QSURROUND) does not operate when you set the
"COMPRESSION" setting in "AUDIO SETUP" to "ON".
• VIRTUAL DOLBY (QSURROUND) does not operate when you are
using a Digital connection.
• QSURROUND
TM
is a trademark of QSound Labs, Inc.
60
GB
DVD
DVD
Dolby Digital MPEG Audio
2ch/Linear Ver. 2.0/
PCM
DTS
✕ ✕
lights on the front panel
VIRTUAL
OPERATE
VIRTUAL
FUNCTION
CONTROL
TITLE
RETURN
CLEAR
C
REV
RESUME
ON" and
SLOW
SKIP
ON
OPEN/
SETUP SCREEN CLOSE
ZOOM
DISPLAY DIMMER
SUBTITLE ANGLE AUDIO
MENU
ENTER
REPEAT
A B REPEAT
PROGRAM
MEMORY DIRECT
M
FWD
PLAY
STILL PAUSE
STOP
F.ADV SLOW
SKIP
DVD VIDEO PLAYER