Zooming An Image - Sharp DV-620S Operation Manual

DVD Playback
DVD
DVD

Zooming an Image

1
While a disc is playing, press ZOOM.
• Each press of ZOOM cycles through the zoom settings in the
following sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → ZOOM 3 (2.0×) → Off.
• When playing a Pan Scan disc while
"TV MODE" setting on the "TV MODE SETUP" screen, each
press of ZOOM cycles through zoom settings in the following
sequence:
ZOOM 1 (1.2×) → ZOOM 2 (1.5×) → Off.
Note that all of the above zoom factors are approximate only.
• While an image is zoomed, you can use ', ", \ and | to
shift the view and display the part you want.
Press ZOOM.
• The zoom indicator changes from white to red to let you know when
you are trying to perform an illegal shift of view. If you are already at
the far left side of the image, for example, the zoom indicator will
become red when you press \.
• An image may become distorted when zoomed.
• You can cancel the zoom operation by pressing ËSTOP, MENU,
TITLE, FWDè, or È REV.
• The setting screen is cleared automatically whenever you display a
DVD screen that enables you to change the scene by pressing ', ",
\ or |.
• 1.2×, 1.5×, and 2.0× zoom are approximate magnification values only.
The actual image may be somewhat larger or smaller depending on
the recording system (NTSC or PAL) that was used to record the disc.
40
GB
DVD
DVD
4 : 3 P S
Press '.
Press \ .
is selected as the
Press |.
Press " .
: 1
ZOOM
ZOOM indicator
ON
OPEN/
OPERATE
SCREEN
SETUP CLOSE
VIRTUAL ZOOM
DISPLAY DIMMER
FUNCTION
SUBTITLE ANGLE AUDIO
CONTROL
MENU
TITLE
RETURN ENTER
REPEAT
A B REPEAT
PROGRAM
CLEAR MEMORY DIRECT
C M
REV FWD
PLAY
RESUME
STILL PAUSE
STOP
SLOW F.ADV SLOW
SKIP SKIP
DVD VIDEO PLAYER