Digital Connection - Sharp DV-620S Operation Manual

Dvd video player
Table of Contents

Advertisement

I Digital Connection
You can make this connection
using either a coaxial digital
cable or an optical digital cable.
Coaxial digital cable
(commercially available)
To coaxial
digital input jack
Digital Connection to an MD to Record a CD
Some Audio CDs and VIDEO CDs have a short silent section between musical tracks. When sound from discs
such as these is digitally recorded by connecting the Player directly to a digital recorder (such as an MD player),
the music may be recorded continuously and track numbers may be lost.
I Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD or VIDEO CD
Play the disc as you normally would, with the audio mode set to "L+R" (see page 65). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
AV OUT
OUTPUT
S-VIDEO
SELECTOR
OUT
S-VIDEO
RGB
VIDEO
To coaxial
DIGITAL OUT jack
To optical
digital input
jack
DIGITAL IN
COAXIAL
OPTICAL
Audio equipment with
optical/coaxial digital input jack
Required cable
Coaxial digital cable (commercially available)
or
Optical digital cable (commercially available)
VIDEO
OUT
DIGITAL
OPTICAL
L
OUT
DIGITAL OUT
AUDIO
OUT
R
To OPTICAL
DIGITAL OUT
jack
or
Optical digital cable
(commercially available)
Connection
DVD Player
19
GB

Advertisement

Table of Contents
loading

Table of Contents