Table of Contents
Advertisement
VIRTUAL Surround (Audio) Selection (DVD only)
This function allows you to enjoy a "surround sound" effect when
you are using an analogue connection (using AUDIO OUT
"FRONT" on the DVD player) to 2-channel audio equipment (TV,
etc.).
Virtual Surround operates when you are playing DVD discs
recorded in Dolby Digital sound or Dolby Pro Logic sound.
Preparations:
When you use the Virtual Surround function, set the SPEAKER
setting in SET UP to "2ch/DIGITAL".
These functions do not operate for VCDs or CDs.
Virtual Surround cannot be used with linear PCM sound.
1
While a disc is playing, press the VIRTUAL button on the remote
control. Then take the appropriate steps below for your speaker
setup (2ch/DIGITAL, 5ch or 5.1ch) in "SET UP" (see page 20)
and the audio modes recorded on the disc.
Types of audio recorded
on the disc
SET UP speaker
settings
The speaker mode is set to
2ch/DIGITAL in SET UP.
Virtual surround does not operate when you set the SPEAKER
Setting in SET UP to "5ch" or "5.1ch".
Virtual Surround does not operate when you are using a Digital
connection.
If the speaker mode is set to "2ch/DIGITAL" in SET UP, the setting
switches between "2ch (down mix)" and "Virtual ON" depending
on the audio modes recorded on the disc ("Dolby Digital" and
"Pro Logic").
When VIRTUAL is ON, "VIRTUAL" lights on the front panel display.
When PRO LOGIC is ON, "PRO LOGIC" lights on the front panel
display.
52
GB
Dolby Digital
Dolby
Dolby Digital
2ch/Linear
Pro Logic
RETURN
MPEG Audio
Ver. 2.0/DTS
PCM
OPERATE
OPEN/
DIMMER
DISPLAY
CLOSE
DIGITAL
DIGITAL
SETUP
VIRTUAL
GAMMA
S.PICTURE
VIRTUAL
SUBTITLE
SUBTITLE
ANGLE
AUDIO
ON/OFF
TITLE
MENU
ENTER
REPEAT
A B REPEAT
PROGRAM
CLEAR
MEMORY
DIRECT
C
M
SKIP
SKIP
PLAY
RESUME
STILL
PAUSE
STOP
REV
FWD
SLOW
Advertisement
Table of Contents
