Sharp QT-UH4H Operation Manual page 18

Listening to a CD or MP3/WMA disc (continued)
QT-UH4H
ENGLISH
Playback
1
Set the FUNCTION switch to CD/USB, Power "ON"
indicator will light up.
2
Press the OPEN button to open CD door.
3
Place the disc on the spindle, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc
compartment.
4
Close the CD door by firmly pushing the right corner of it.
5
Press the /
To stop playback:
Press the button.
To remove the disc:
In the stop mode, press the OPEN button to open the CD door.
Caution:
Do not place two discs in the spindle.
Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will not
play back.
E-7
12 cm (5")
button to start playback.
FUNCTION
Various disc functions
8 cm (3")
Function
Play
Stop
Pause
Track up/
Track
down
Fast for-
ward/Fast
reverse
Note:
Rewritable multi session discs which writing is not finished, can
still be played.
TAPE (STAND-BY)
CD/USB
RADIO
X-BASS
ON OFF
TAPE (STAND-BY)
CD/USB
RADIO
FUNCTION
MIC
PAUSE STOP/EJECT F.FWD REWIND PLAY
Main unit Operation
Press in the stop mode.
/II
Press in the playback mode.
Press in the playback mode. Press
the / button to resume playback
/II
from the paused point.
Press in the playback or stop mode.
If you press the button in the stop
mode, press the
the desired track.
Press and hold down in the play-
back mode.
Release the button to resume play-
back.
• AM
• FM
BAND
RECORD
/ button to start