To Remove Usb Memory Device - Sharp QT-UH4H Operation Manual

3
Whilst play mode, press the FOLDER button, and press the
/ button to select desired playback folder.
(Folder mode on)
FOLDER Indicator
FOLDER
FOLDER Number
Folder indicator will turn off after track playback.
To change the playback folder, repeat step 3.
4
Select desired file to be played back by pressing the
button. (Folder mode off)
USB
MP3
5
To stop playback, press the STOP
Note:
To pause playback:
Press the / button.
FOLDER
Track number start
from this FOLDER
or
button.

To remove USB memory device

1
Press the STOP button on the unit.
2
Disconnect USB memory device from the USB terminal.
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory's format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
In case the data inside the USB memory is large, it may take a
longer time for data to be read.
External storages cannot be played back via the USB terminal.
Some USB-multi card reader could not work properly with the
USB terminal.
QT-UH4H
ENGLISH
E-12