Sharp QT-UH4H Operation Manual page 29

Recording from the built in microphone
1
Set the FUNCTION switch to TAPE.
2
Load a cassette into the cassette compartment.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again to begin recording.
Notes:
Monitoring of the recording is not possible.
Recording from the built-in microphone is not in stereo.
Recording from CD/USB
1
Set the FUNCTION switch to CD/USB.
2
Load a blank cassette into the cassette compartment with
the side to be recorded on facing up.
3
Press the PAUSE button.
4
Press the RECORD button.
5
Press the PAUSE button again to begin recording.
6
When press the STOP/EJECT / button during recording,
display will appear, but CD still spinning.
7
To stop the CD spinning press the CD
Programmed track recording from CD/USB
1
Select the memories track you want to record.
2
After memories the selected track, press the RECORD
button. The recording for memory track will begin until
end.
3
After recording is completed, disc will stop to rotate, but
tape still rotating.
4
Press the STOP/EJECT / button to stop recording.
Notes:
Folder programme is not possible.
Cassette play and record buttons will automatically release when
the end of tape has been reached.
button.
QT-UH4H
ENGLISH
E-18