Adjusting The Air Flow Direction - Sharp AH-AP18FMF Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
Press the SWING button on the remote
control once.
• The vertical adjustment louvre will
change its angle continuously.
Press the SWING button again when
the vertical adjustment louvre is at the
desired position.
• The louvre will stop moving within the
range shown in the diagram.
• The adjusted position will be memo-
rized and will be automatically set to
the same position when operated the
next time.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment lou-
vre as shown in the diagram and
adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT(
Condensation may form on the louvres.
Adjustment range
The adjustment range is narrower the
SWING range in order to prevent con-
densation from dripping.
)" for an extended period of time.
11