Connecting The Audio Cable; Connecting To A High-End Workstation - Epson PowerLite 713C User Manual

Connecting the Audio Cable

If your presentation includes sound and you want to use the
projector's built-in speakers, you can use a computer audio cable. The
required cable (3.5-mm stereo miniplug cable) is available from
computer or electronics dealers.
1. Connect one end of the audio cable to the
projector.
2. Connect the other end of the audio cable to the speaker or
audio-out jack on the Macintosh.

Connecting to a High-End Workstation

Your PowerLite projector is capable of remapping input resolutions
×
up to 1600 1200 pixels (1280
Since 1280 × 1024 pixels is the default resolution for most leading
workstations, your projector is ideal for displaying workstation video
output.
There is no standard for workstation video output. Workstations that
follow the SXGA standard and use the HD15 (standard VGA)
connector won't need an adapter cable or any special connection
device. However, your system may vary; contact your computer dealer
if you need help connecting your workstation.
Audio In
×
1024 pixels on the PowerLite 503c).
Appendix A: Connecting to Additional Equipment
port on the
79