Solving Problems
58
Using On-Screen Help
If the image doesn't look right or your audio isn't working, you can
get help by pressing the blue
under the cover on the remote control. The following choices are
available:
I
Help for the image
I
Help for the sound
I
Language selection
Follow these steps to get help:
1. Press the blue
? Help
control. You see the help menu.
2. Press the left side of the
projector (or use the
highlight one of the options. Then press the
button to select it.
3. Press the left side of the
projector (or use the
highlight the problem you want to solve. Then press the
(
) button to view the solution(s).
Source
4. Highlight a solution (if this choice is available). Then press the
(
button to select the solution.
Enter
Source)
Highlight
Return
need to back up.
If the solution is to adjust one of the settings, press the left side of
the
(
Select
Keystone
button on the remote control) to adjust it.
5. To exit the Help system, press the blue
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
button on top of the projector or
? Help
button on the projector or the remote
(
Select
Keystone
button on the remote control) to
Enter
(
Select
Keystone
button on the remote control) to
Enter
and press the
(
Enter
Source
) button on the projector (or use the
? Help
) button on the
(
)
Enter
Source
) button on the
Enter
) button if you
Enter
button.