Adjusting The Air Flow Direction; Full Power Operation - Sharp Plasmacluster AE-X12LSR Operation Manual

ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button.
• The vertical airfl ow louvre will swing.
2
Press the SWING button again
to stop the desired position.
Adjustment range
COOL and DRY modes
HORIZONTAL AIR FLOW DIRECTION
Adjust the horizontal air fl ow direction
with the louver lever.
Louvre levers
CAUTION:
Never attempt to adjust the vertical airfl ow lou-
vre manually.
• Manual adjustment of the vertical airfl ow lou-
vre can cause the unit to malfunction.
• When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.

FULL POWER OPERATION

The air conditioner works at the maximum
power to makes the room cool or warm
rapidly.
1
1
2
HEAT mode
NOTE:
• The air conditioner will operate at "Extra
HIGH" fan speed for 5 minutes, and then shift
to "HIGH" fan speed.
• You can not set the temperature or fan speed
during the FULL POWER operation.
GB-6
During operation, press the
FULL POWER button.
• The remote control will display "
• The temperature display will go off.
• The green FULL POWER lamp (
light up.
TO CANCEL
Press the FULL POWER button again.
• The green FULL POWER lamp (
turn off.
".
) will
) will
1