Maintenance; Cleaning The Filters - Sharp AE-M18AE-T Operation Manual

MAINTENANCE

Be sure to disconnect the power cord from the wall outlet or turn off the circuit
breaker before performing any maintenance.

CLEANING THE FILTERS

1
2
3
2
1
CLEANING THE UNIT AND THE REMOTE CONTROL
» Wipe them with a soft cloth.
» Do not directly splash or pour water on them. Water can cause electrical shock or
equipment damage.
» Do not use hot water, thinner, abrasive powders or strong solvents.
MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the FAN
ONLY mode for about half a day
to allow the mechanism to thor-
oughly dry.
2
Stop the operation and unplug
the unit. Turn off the circuit
breaker, if you have one exclu-
sively for the air conditioner.
3
Clean the filters, then reinstall
them.
1
TURN OFF THE UNIT
2
REMOVE THE FILTERS
1
2
3
3
3
CLEAN THE FILTERS
Use a vacuum cleaner to remove dust. If the
filters are dirty, wash them with warm water
and a mild detergent. Dry filters in the shade
before reinstalling.
4
REINSTALL THE FILTERS
1
2
3
E-14
The air filters should be cleaned every two weeks.
Open the front panel.
Push the air filters up slightly to unlock them.
Pull the air filters down to remove them.
Reinstall the filters in the original positions.
Close the front panel.
Push the centre part of the panel firmly to
lock it in place.
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
Make sure that the air filters are
not dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
3
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.