Adjusting The Air Flow Direction; Vertical Air Flow; Horizontal Air Flow - Sharp AE-M18AE-T Operation Manual

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW

The air flow direction is automatically preset in each mode as follows for optimum
comfort:
COOL and DRY mode
FAN ONLY and HEAT mode
HOW TO ADJUST THE AIR FLOW DIRECTION
Press the SWING button on the
remote control once.
» The vertical adjustment louvres
will change its angle continu-
ously within the range shown
in the diagram.
Press the SWING button again
when the vertical adjustment lou-
vres are at the desired position.
The louvres will stop moving
when the button is pressed.

HORIZONTAL AIR FLOW

Hold the horizontal adjustment
louvre levers as shown in the dia-
gram and adjust the air flow di-
rection. There are three louvre
levers.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
» Manual adjustment of the vertical adjustment louvres can cause the unit to malfunction
when the remote control is used for the adjustment.
» When the vertical adjustment louvres are positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Adjustment range
COOL and DRY mode
The adjustment range is
narrow in order to pre-
vent condensation from
dripping.
Louvre levers
E-8
Horizontal air flow
Diagonal air flow
FAN ONLY and HEAT mode
The range is wide so the
air flow can be directed
toward the floor.