Sharp AE-M18AE-T Operation Manual page 12

TIMER OPERATION
P P @ P P P P @ P P P @ P @ P P @ @ P @ P P @ @ @ P @ @ @ P @ @ @ P @ @ @ P
TIMER ON
AM
1H
MODE FAN
SWING
SET/C
+
COMBINED USE OF ON AND OFF TIMERS
You can use the ON and OFF timers in combination.
AM
PM
NOTES:
» You cannot programme the TIMER ON and TIMER OFF to operate the unit at different
temperatures or other settings.
» Either timer can be programmed to activate prior the other.
1
Press the TIMER ON (
2
The TIMER ON indicator will blink. Press the TIME
ADVANCE or REVERSE button to set the desired
time. (The time can be set in 10-minute incre-
ments.)
3
Point the remote control at the signal receiver
window on the unit and press the TIMER SET
(SET/C) button.
» The yellow TIMER lamp (
» The unit will generate a beep when it receives
4
Select the operation condition.
» The unit will turn on prior to the set time to allow
3
1
2
-
Example:
To stop operation at 11:00 p.m. and resume operation
(with the same mode and temperature settings) to bring
the room temperature to the desired level by 7:00 a.m.
1
Set the TIMER OFF to 11:00 p.m. during operation.
2
Set the TIMER ON to 7:00 a.m.
The arrow (
the TIMER OFF indicator shows which timer will activate
first.
light.
the signal.
the room to reach the desired temperature by
the programmed time. (Awaking function)
or ) between the TIMER ON indicator and
E-10
) button.
) on the unit will