Attaching And Detaching The Battery Pack; Attaching The Shoulder Strap - Sharp VL-C8000X Operation Manual

ATTACHING AND DETACHING THE BATTERY PACK

Attaching the Battery Pack
1. Lower the battery release lever
by pulling it forward.
Detaching the Battery Pack
1. Lower the battery release lever
by pulling it forward.
The battery pack is uncharged when shipped and must be charged before use.

ATTACHING THE SHOULDER STRAP

Loop the strap through the eyelet on top of the Camcorder.
Loop the strap through the eyelet at the bottom of the Camcorder.
Before using the Camcorder, make sure that the shoulder strap is fastened tightly enough, and that no slack exists.
a
2. Align the "A" mark on the up-
per portion of the battery pack
with the mark on the camera,
and slide it in the direction of
the arrow.
2. Remove the battery pack by
sliding it in the direction of the
arrow.
3. Raise the battery release lever
until it locks into place.
3. Raise the battery release lever
until it locks into place.