Sharp VL-C8000X Operation Manual page 5

Hide thumbs Also See for VL-C8000X:
Table of Contents

Advertisement

For safety, strictly observe the following
metal objects from entering the unit. Should this
happen, switch the power off and have the Camcorder
checked by qualified personnel.
Do not operate the Camcorder during lightning
l
storms. Unplug power cables of any connected
equipment.
Avoid
using the Camcorder under the following
conditions
*Places of extreme humidity or excessive dust.
Near electrical appliances generating strong mag-
l
netic fields (fluorescent lights, televisions, speak-
ers).
stove.
*Excessive mechanical shock or vibration.
*Extremely hot locations such as near heating.
bathtubs and the like.
not expose
D
the Camcorder to extremely high
O
or low temperatures for long periods
Never leave this Camcorder in direct sunlight, in a
l
closed car during summer or near a heater - this
will most likely deform the exterior and damage the
internal parts of the Camcorder.
Do not store the Camcorder in places over 60°C.
l
Do not use the Camcorder in places over 40°C.
l
Do not use the Camcorder in places below 0%.
l
Do not use the Camcorder in humid places over 80%
l
RH.
Store the Camcorder in a location that stays between
Take extra care when recording outdoors
surface. Protect from damage during transporta-
tion.
Prevent the Camcorder from getting wet.
l
prevent sand from entering the Camcorder.
like the sun or other strong lights.
Stop using the Camcorder during lightning storms.
l
BEFORE DISCONNECTING A POWER SOURCE,
ALWAYS SLIDE THE OPERATE SWITCH TO OFF -
THE OPERATE INDICATOR WILL GO OUT.
Handling the Camcorder
l
Protect the microphone from damage.
Keep the Camcorder horizontal during use, other-
l
wise the tape may become slack and be damaged.
Loop the strap over your arm - should the Cam-
corder accidentally slip out of
will avoid damaging it. _
*Cap the lens after use. Remember to switch the
power off.
*Before attaching any filter to the lens, switch to manual
focus or switch the power off and remove the lens
hood.
Cleaning the Camcorder
*Detach the battery pack or disconnect the power
before cleaning the Camcorder.
@Remove dust with a soft cloth. Use a soft cloth
moistened with mild detergent to remove persistent
dirt.
Do not use strong cleaning agents such as PETROL,
l
thinner or alcohol - they may damage the exterior.
*Keep the lens and viewfinder clean. Clean the lens by
first blowing it free of dust, then gently wipe it with a soft
brush or lens cleaning paper moistened with lens
cleaning fluid.
your hand, you

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quick zoom 12 vl-c8000x

Table of Contents