Table of Contents
Advertisement
Slide the REC Speed LP/SP select switch to
select the tape speed and set the recording time.
This causes the selected recording mode to
appear in the viewfinder. Recording time on
the m4 tape EG30 is as follows.
SP mode: 30 minutes
LP mode: 60 minutes
Set the CAMERA RECNCR PLAY switch to
"CAMERA REC" position.
Set the FULL AUTO switch to "FULL AUTO" posi-
tion. Make certain that the " -1)" and " @a "
marks appear in the LCD display.
and " @GI " marks are flashing, an alarm indicator
will appear in the viewfinder. (See page 20.)
Press the REC START/STOP button. While
recording, ">>>>>"
in the viewfinder moves in
sequence from left to right.
If recording for an extended pertod of time, the handgrip
may become hot. However, this does not indicate mal-
function.
If you wish to pause during recording, press
the REC START/STOP button again. Press the
button again to continue recording.
If the Camcorder is in the REC PAUSE mode for more
than 5 minutes, it will switch itself off. To restart recording
just slide the OPERATE switch to ON.
If the " CH'
FULL AUTO swttch
15
Advertisement
Table of Contents
