Auto Date/Time Function - Sharp VL-C8000X Operation Manual

AUTO DATE/TIME FUNCTION

The auto date/time function features a date and time
which can be recorded as a handy reference.
Follow the procedures outlined below for recording the
date or date/time along with the subject.
If the date and time are not set, the DATE-TIME DISPLAY but-
ton will not function. (See page 7.)
1
Connect to a power source and slide the OPERATE switch to on. Slide the CAMERA RECNCR PLAY switch to
"CAMERA REC" and the Camcorder will change to REC PAUSE.
Press the DATE-TIME DISPLAY button. Either the date or date/time will be displayed in the viewfinder. Pressing
this button changes the display in the viewfinder as follows, and either the date or date/time can be set.
P M 3 2 7
10.27.91
Press the REC START/STOP button. The date or date/time displayed in the viewfinder will be recorJed along with
the subject.
ck mode is en-
appears when the
CE button is pressed.
10. 27. 91
mode is engaged.
ppears when the BLC/
pressed while
ade stand-by mode is engaged.
en the REC START/STOP button is
pressed, Fade in or Fade out is ob
,
21