Turning On The Password And User's Logo; Starting The Projector With A Password - Epson PowerLite 54C Manual

EPSON PowerLite 54c/74c Projector
4. Enter a 4-digit password using
the numeric keypad on the
remote control.
The password will be displayed
as . After you enter the last
****
digit, a confirmation screen
appears. Enter the password
again.
5. After you finish setting the
password, press the
Esc
to return to the Password Protect
menu.
Make a note of the password and keep it in a safe place in case
you forget it.

Turning On the Password and User's Logo

To enable the password and User's Logo, follow these steps:
1. Press the button on the remote control until you see
Freeze
the Password Protect menu.
2. Select
Power ON Protect
3. Select , then press
ON Esc
4. If you want to disable the password temporarily so someone
can use the projector without entering the password, select
and press . Use the numeric keypad to enter the
Timer Enter
number of hours (from 0 to 999) you want the password
feature disabled. If you want the projector to request the
password every time it is turned on, set the timer to
The timer starts counting as soon as you close the Password
Protect menu. (You can check the elapsed time in this menu
next to .)
Time elapsed
When the period defined in the Time-elapsed setting has
passed, and the password is entered correctly, the elapsed
time will be reset to and the timer will start again. So
0
remember to disable or change this setting when you need
to.
5. To enable your screen logo, select
press . Select and press
Enter ON
When this feature is on, the logo appears whenever the
projector is turned on (if the Startup Screen is enabled) and
as the A/V Mute screen (if you enabled the logo for the
setting). None of the User's Logo
Background Color
features can be changed when the User's Logo Protect
function is enabled.
6. Press to close the Password Protect menu.
Menu
If you lose the remote control, you will not be able to enter the
password; so keep the remote control in a safe place at all times.
You can store it in the compartment under the projector. See
"Storing the Remote Control" on page 8.
10 EPSON PowerLite 54c/74c Projector
-
button
Use these buttons like a
numeric keypad to enter
the password
and press .
Enter
.
User's Logo Protect
.
Enter

Starting the Projector with a Password

When the password function is enabled, you see this screen
when you turn on the projector:
Use the numeric keypad buttons to enter the password. Once
you have entered the password correctly, the password screen
closes, and projection begins.
If the password is not correct, you see the message "Wrong
password. Please try again." If you enter an incorrect password
three times in succession, you see the message "The projector's
operation will be locked. Request code xxxxx" and the projector
switches to standby mode for approximately 5 minutes. Write
down the request code. Then disconnect the projector's power
cord from the electrical outlet, reconnect it, and turn the
projector back on.
When you see the Password Protect Release screen again, you
can try to enter the correct password.
If you have forgotten the password, contact EPSON with the
request code number that appears in the Password Protect
Release screen for assistance.
If you enter an incorrect password nine times in a row, the
.
0H
projector remains locked and you must contact EPSON to
unlock it.
and
10/03