Listening To A Cassette Tape; 16. Cassette Compartment; Tape Reverse Play Button; Tape Reverse Mode Select Button - Sharp XL-HP500W Operation Manual

Listening to a cassette tape

Before playback:
" For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not recom-
mended.)
" Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by push-
ing the area marked "PUSH
EJECT ".
4
Load a cassette into the cas-
sette compartment with side A
facing you.
5
Press the button to choose one side or both sides.
... To listen to both sides.
... For endless repeat play of
both sides.
... To listen to one side.
6
Press the / ( ) button to listen to side A, or the
ton for side B.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
To stop playback:
Press the (TAPE ) button.
Fast forward/rewind on side A:
To advance the tape, press the button. To rewind it, press the
button.
Fast forward/rewind on side B:
To advance the tape, press the button. To rewind it, press the
button.
Caution:
" To remove the cassette, press the
open the compartment.
" Before changing from one tape operation to another, press the
(TAPE ) button.
" If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
02/8/6 XL-HP500W(A)2.fm
XL-HP500W
ENGLISH
but-
(TAPE ) button, and then
E-20