General Control - Sharp XL-DK227NH Operation Manual

General control

XL-DK227NH
XL-DK257NH
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the unit's power is turned on, the ring around the volume
control lights up. To turn on/off the light, hold down the
CLEAR/DIMMER button on the remote control for more than 2
seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
11
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to increase or decrease the volume.
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control.
Equaliser
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
Equaliser off
FLAT
For rock music
ROCK
For classical music
CLASSIC
For pop music
POPS
Vocals are enhanced
VOCALS
For jazz
JAZZ
0 .....
30 MAXIMUM