About Menu; Video - Epson EMP-TW100 User Manual

Main menu
Setting Projection
Language
Reset

About Menu

The "About" menu displays the settings for the input source for the images being projected, and also shows
the lamp status.
The "Lamp" shows times between 0 and 10 hours as 0H. Times greater than 10 hours appear in units of one
hour.
Video (InputA (YCbCr , YPbPr ), InputB (YCbCr, YPbPr), S-Video, Video)
Video (InputA (YCbCr, YPbPr), InputB (YCbCr, YPbPr), S-Video, Video)

Video

Lamp
Advanced Reset Lamp Timer
Setting Video Source
Video Signal
About
Reset All
Select Enter
Main menu
About Lamp
Reset Lamp
Timer
Video Source Displays the image source which is currently being projected.
Video Signal
Sub-menu
Selects the projection method in accordance with the projector and screen
setting-up method.
Front
Front/Ceiling
Rear
Rear/Ceiling
Sets the language for message, menu and help displays.
Press the [Select] on either the projector's control panel or the remote
control, and select the language from the selection menu that appears.
Returns the adjustment values in the "Setting" menu to the default values.
Press the [Select] on either the projector's control panel or the remote
control to display the confirmation screen, and select "Yes".
Select "Reset All" to return all menu settings to their default settings.
(p.32)
0H
Execute
Sub-menu
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in red.
Initializes the lamp operating time when the lamp is replaced. When this
command is selected, the cumulative lamp operating time is reset to the
initial default value.
Displays the video signal format.
Video menu Setting menu
Advanced menu

About menu

Function
:Projection from the front of the screen
:Projection from the front of the screen with the
projector installed to the ceiling (upside down)
:Projection from the rear of the screen
:Projection from the rear of the screen with the projector
installed to the ceiling (upside down)
Function
Reset All menu
Default
setting
Front
English
-
Default
setting
0H
-
Depends on
connection
Auto
31