Selecting The Image Aspect Ratio; Normal Mode - Epson EMP-TW100 User Manual

Adjusting the Image Quality

Selecting the Image Aspect Ratio

The aspect ratio
aspect ratio settings that can be selected will vary depending on the input signal.
Video (SDTV )
Video (HDTV )
Computer (SVGA
Computer (XGA
Procedure
Details of each aspect ratio are as follows.

Normal mode

14
for projected images can be selected from the following five types of setting. However, the
Input signal Normal
or lower)
or higher)
Do not use the aspect mode function to elongate or compress image that are being projected for
commercial purposes or in public places such as hotel lobbies or stores, as doing so may infringe
the rights of the original copyright owner for the images under copyright protection laws.
Projector Remote control
4:3 image
Squeeze Zoom
O O O
O - -
O - O
O - O
The aspect ratio changes as shown
below each time the [Aspect] button on
either the remote control or the
projector's control panel is pressed.
Normal
Squeeze Through
The current setting appears on the screen each
time the aspect ratio changes.
Normal
Through Squeeze Through
O
O
O
-
Squeeze Zoom Through
The aspect ratio of the images being input
is maintained, and the images are
projected into a 16:9 screen area.
When 4:3 images are being projected,
black bands will appear at the left and
right of the image as shown in the
illustration at left.
O
-
-
-