Replacing Consumables; Lamp Replacement Period - Epson EMP-TS10 User Manual

Replacing Consumables

This section describes how to replace the lamp and the air filter.

Lamp Replacement Period

It is time to replace the lamp when:
The message "Lamp Replace" appears on the screen when projection starts.
A message will be displayed.
The indicator flashes orange or lights red.
The projected image gets darker or starts to deteriorate.
In order to maintain the brightness and quality of the projected images, replace the lamp as
soon as possible after the warning message appears.
The replacement warning message is set to appear after 2900 hours of lamp use in order to
maintain the brightness and quality of the projected images. If you continue to use the lamp after
this period, the possibility of the lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if it is still
working.
The warning message appears after 2900 hours of use, but the actual life of each individual
lamp will vary depending on the characteristics of the lamp and on the way it has been used.
Some lamps may stop operating before 2900 hours of use, so you should always have a spare
lamp ready in case.
When the lamp replacement warning message appears, the user's logo will not appear even if
the start-up screen setting is ON.
Contact your dealer for a spare lamp.
The message appears for 30 seconds, and disappears again
after 30 seconds have passed.
Lamp indicator flashes orange or lights red.
Cleaning

Replacing Consumables

47