Advanced Menu - Epson EMP-TS10 User Manual

Advanced Menu

Main menu
Advanced Language
Startup
Screen
Color
Adjustment
Rear Proj.
Ceiling
COM Port
Reset
Video Menu
Audio Menu
Sub-menu
Sets the language for message displays.
Press the button on the projector's control panel or the [Enter] button
on the remote control, and select the language from the selection menu
that appears.
Sets whether the startup screen is displayed or not.
To change the user's logo, you need to record and set your own logo.
Adjusts the color temperature
image.
Absolute color temperature: Lighter colors are adjusted so that they range
from having a red tinge to having a blue tinge. When the color temperature
is lower, the red content is greater and color tones appear softer. When the
color temperature is higher, the blue content is greater and color tones
appear fresher.
Press the button on the projector's control panel or the [Enter] button
on the remote control, and make the setting using the color temperature
menu that appears.
RGB: Sets the intensity of each color (red, green and blue).
Press the button on the projector's control panel or the [Enter] button
on the remote control, select R (red), G (green) or B (blue) from the color
definition menu that appears, and then make the adjustment.
You can adjust the colors while viewing the results on the screen.
(This item cannot be selected if sRGB has been selected as the Color Mode
setting in the Video menu.)
Use when projecting images from behind a translucent screen.
When set to ON, the projected images are horizontally reversed.
Use when installing the projector to a ceiling or when using the projector
upside down.
When set to ON, the projected images are horizontally and vertically
reversed.
Switches between Control (RS-232C) and USB serial communication.
Resets all adjustment values for the Advanced menu functions to their
default settings.
Press the button on the projector's control panel or the [Enter] button
on the remote control to display the confirmation screen, and select Yes.
Select Reset All to return all menu settings to their default settings. (p.27)
Setting Menu

Advanced Menu

User's Logo Menu About Menu
Function
and intensity of each RGB color in the
Reset All Menu
Using the Menus
Default
setting
English
ON
Color Temp :
Depends on
connection
OFF
OFF
RS-232C
-
25