E-Zoom - Epson EMP-TS10 User Manual

E-Zoom

This function lets you enlarge or reduce selected areas of images.
Procedure
1
2
3
The selected area can be enlarged to between 1 – 4 times, in 25 steps of x 0.125.
If a sub-screen has been set using the P in P function, the enlargement function is applied to
both the main screen and the sub-screen.
If the E-Zoom function is in use, the projector's buttons cannot be used to perform adjustments
such as keystone correction, tracking adjustment and sync adjustment.
If the E-Zoom function is used while the keystone correction amount is near the limit value, the
keystone correction amount may change.
Remote control
cross
Reduction Expansion
Shows enlargement ratio
Press the [E-Zoom] button on the remote
control.
A cursor (cross) indicating the center point for the
area to be enlarged will appear on the screen.
Move the cross to the area of the image
that is to be enlarged or reduced.
Tilt the [Enter] button on the remote control to
move the cross.
If you press the right side of the [E-
Zoom] button, the image will be
enlarged centering around the cross. If
you press the left side of the [E-Zoom]
button, the area of the image that was
enlarged will then be reduced in size
again.
You can scroll around the image by tilting the
[Enter] button.
To cancel the zoom, press the [Esc] button.
A/V Mute

E-Zoom

Freeze P in P
31