Advanced" Menu - Epson EMP-74 User Manual

Using the Configuration Menu Functions Using the Configuration Menu Functions

"Advanced" Menu

*Contents of the menu screen of EMP-74L differs slightly.
Sub-menu
Brightness This lets you set the lamp brightness to one of two settings.
Control Select "Low" if the images being projected are too bright
(EMP-74/ such as when projecting images in a dark room or onto a
54 only) small screen.
When "Low" is selected, the brightness of the images is
reduced, the amount of electricity consumed and noise
produced during projection are reduced and the lamp's
operating life is extended.
Startup Sets whether the startup screen is displayed or not.
Screen To change the user's logo, you need to record your own user's
logo. p.90
This cannot be changed from enabled ("ON") to disabled
("OFF") if the "User's Logo Protect" function of Password
Protect has been set to "ON". Cancel the Password Protect
function before changing the setting.
Function
61
Default
High
ON