Basic Operation - JVC RC-EX25S Instructions Manual

Basic operation

1 Press CD/RANDOM to enter CD mode, if the unit
is in TUNER or TAPE mode.
You can press CD/RANDOM on the remote control
unit to enter CD mode.
2 Press ) PUSH to open the disc door.
3 Load a disc with the label side facing up and close
the disc door.
• 8-cm (3-3/16") CD can be played on the unit without
an adapter.
4 Press PLAY/PAUSE 3/8 to start playback.
You can start playback by pressing CD PLAY/PAUSE
on the remote control unit.
The current track number and elapsed playing time
are displayed during playback.
CD
5 Adjust the volume.
Notes:
• The following indication may be displayed when the
disc is loaded upside down. Reload the disc correctly.
CD
• If mistracking occurs during playback, lower the
volume.
• Mistracking may occur if a strong shock is applied to
the unit or if it is used in a place subject to vibrations
(e.g. in a car travelling on a rough road).
• If you press CD/RANDOM while in CD mode, the unit
enters the random playback mode.
02_01-22_RC-EX25S_J_En.p65
5 1 3 2 4
PUSH
REMOTE
DISPLAY
SENSOR
10
1
STANDBY/ON
CD/
RANDOM
INTRO
FM MODE
CD REPEAT/
+ PRESET EQ
PRESET MUTING
–
RM-SRCEX25A REMOTE CONTROL
To stop playback
Press STOP 7.
You can press STOP on the remote control unit to stop
playback.
STOP
Main unit
Caution:
Stop playback before opening the disc door. Check that
the disc has completely stopped rotating before
unloading the disc.
To pause playback
Press PLAY/PAUSE 3/8 during playback.
You can press CD PLAY/PAUSE on the remote control
unit to stop playback.
To resume playback, press the button again.
Main unit
04.3.31, 7:05 PM
4 5
DISPLAY
TUNER/
BAND TAPE
CD PLAY
STOP /PAUSE
HBS/
+
VOLUME
–
STOP
Remote
CD PLAY
/PAUSE
Remote
10