Regency P36D-NG1 Owners & Installation Manual page 57

Note: The facing material has to go on after the unit is set.
1) Remove Glass Door. Refer to P36 Manual.
2) Remove 2 screws and bracket as indicated (refer to Diagram 2).
Remove bracket
Remove both screws
3) Install On/Off switch (refer to Diagram 3).
Diagram 3
®
Regency P36D-1 Zero Clearance Direct Vent Gas Fireplace
Diagram 2
On/Off Switch
Control
Mounting
Bracket
4) Place bracket under the Flange. Secure with 2 screws as indicated
in Diagram 4.
Diagram 4
5) Loosen the 3 x #8 Phillips Head Screws located on the inside top
of the outer frame of the appliance (refer to Diagram 5).
3 x #8 Phillips
Diagram 5
®
REGENCY OPTIONS
INSTALLATION
57 57