Stitches Blind Hem Stitch; Lace Work - Kenmore 385.15212 Owner's Manual

SECTUON V. UTOL_TYA_'_D DECORATIVE
STITCHES
Blind Hem Stitch
Stitch pattern selector: 5 or 6
(_ Presser foot: Zigzag foot
Needle thread tension: 1 to 4
® Stitch length control: 1 to 3
_) Stitch width control: 5
Lightweight fabric
Heavyweight fabric
_) Wrong side (Bottom side) of fabric
On heavyweight fabrics that ravel, the raw edge should be
overcast first. Then fold the hem, as illustrated, leaving
1/4"(O7 cm) of the hem edge showing°
Position the fabric, so that the needle at its leftmost posi-
tion just pierces the edge of the fold.
After hemming is completed, press together both sides of
the finished hem. The top side of the fabric should show
only the blind stitches.
Lace Work
Stitch pattern selector: 5
(_) Presser foot: Zigzag foot
Needle thread tension: t to 4
@ Stitch length control: 1 to 3
(_) Stitch width control: 5
®
STRETCH ==:=
®
®
.J
STRETCH ====:_
S V L _0_1=2_3_4
® (
,c:;0_1_2_3_4_5 cc_
® (-i ................... @ .... -)
J
Lace adds a fanciful, feminine touch to blouses and
lingerie Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1.5 cm). Place
lace underneath and topstitch with blind hem stitch_ Trim
excess fabric close to stitching,.
50
J