Meat Probe - Dacor Discovery EO Series Use And Care Manual

• Thedurationtimewill appearonthe display. • Thestoptimeanddaywill appear o nthe display.
• Touch the
START key.
• If you did not enter a start time, the oven will start
immediately and stop after the amount of dura-tion
time entered has elapsed. If you entered a start time
"WAITING TO START" will appear on the display.
The oven will turn on at the start time that was
entered and stop cooking after the amount of duration
time entered has elapsed.
• If you are using one of the cook settings, when the
duration time expires, the oven will go into "HOLD"
mode for 2 hours. The oven will reduce the tempera-
ture to about 150°F to keep the food warm and safe
for serving.
Turning the Oven Off Using Stop Time
• After you have set the start time, touch the STOP
TII_IE key.
• Enter the time of day you want the oven turn off
using the keypad. For example, to turn off the oven
at I:IOPM, touch 1, then 1, then O, then AM - PM if
necessary.
• If you want to turn off the oven on a different day,
touch the STOP DAY key repeatedly until the correct
day appears just above the key itself.
Touch the START key. If you did not enter a start
time, the oven will start immediately and stop at the
stop time entered. If you entered a start time "WAIT-
ING TO START" will appear on the display. The oven
will turn on at the start time that was entered and
stop cooking at the stop time entered.
If you are using one of the cook settings, when the
stop time is reached, the oven will go into "HOLD"
mode for 2 hours. The oven will reduce the tempera-
ture to about 150°F to keep the food warm and safe
for serving. At the end of the hold cycle, the oven will
turn off and "CYCLE COHPLETE" will appear on the
display. Touch CANCEL/SECURE to clear the control
panel.
Making Changes or Canceling While the
Oven is "WAITING TO START"
If you want to change the temperature, meat probe or
delay settings while the oven is waiting to start:
o Touch EDIT (if you have a double oven touch the
EDIT key below the word UPPER or LOWER on
the display).
o Change the settings that need to be changed, then
touch START.
• If you want to cancel the delayed start, touch the
UPPER ON/OFF or LOWER ON/OFF key, for double
ovens. For single ovens, touch CANCEL/SECURE.
Meat Probe
/_,,,_ When you cook foods like roasts and poultry,
the internal temperature is the best way to tell
when the food is properly cooked. Your oven's meat
probe takes the guesswork out of roasting. You can use it
to cook food to the exact temperature you desire. You can
select meat probe settings from 100°F to 200°F.
IMPORTANT:
• Use the handle to insert and remove the meat probe
skewer. Also, use the handle on the meat probe plug
to insert and disconnect it. Pushing or pulling on either
end of the cable could damage the meat probe.
Continued...
25