Ovenracksupportsand Ovenvents - Electrolux Built-in Wall Oven Use & Care Manual

Feature Overview
OVENRACK SUPPORTS & OVENVENTS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
InstallingOven Rack Supports
AL WAYS INS TALL O VEN RA CK S UPPOR T
BEFORE TURNING ON THE OVEN
(WHEN THE OVEN IS COOL).
To install oven rack support, insert the
supports by pushing them downward into
the two brackets on each side of the oven
interior, as shown below.
To remove the oven rack support for
a self-clean cycle, pull up the support to
disengage them from the brackets. If the
rack supports are not removed, the self-
clean cycle won't start.
Oven Rack Positions
This oven isequipped with ladder rack supports
with 8 positions to accommodate precisely
every mode of cooking.
Rack
positions
POSITION 1
(NON-SLIDING
RACK ONLY)
Oven Vents Location
The oven is vented above each door. When
the oven is on, warm air is released through
the vents. This venting is necessary for proper
air circulation in the oven and good baking
results.