Settingtimeof Daydisplay- 12 Or 24 Hours,,,26 Settingtemperature Display- For C; Settingcontinuousbakeor 12 Hour Energysaving - Electrolux Built-in Wall Oven Use & Care Manual

Built-in wall oven
Hide thumbs Also See for Built-in Wall Oven:
Table of Contents

Advertisement

Electronic Control Settings
USER PREFERENCES
(CONT)NUED)
[]
[]
[]
[]
[]
[]
[]
m
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
SETT(NGT(MEOF DAYD(SPLAY- t2 OR 24 HOURS
The oven control can be programmed to display time of day in 12 hours or 24 hours mode.
The oven has been preset at the factory to display in 12 hours mode.
Changing between 12 or 24 hour time of day display
1.
Press USER PREF _
until you get to the CLO 12hr menu page.
+
2
Press _oor h_to toggle the display of the clock in 12 or 24 hours.
3.
Press START _
to accept the changes and go back to user preferences
menu
display.
4.
Press CANCEL (_
when finished to get back to the standard oven display.
5.
Remember to set your clock after changing the time of day display mode.
SETT(NGTEMPERATURED(SPLAY-- FAHRENHE(T OR
The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in Fahrenheit,
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.
Press USER PREF _
until you get to the F=C F menu page,
+
2.
Press hi or io to toggle between the °C and °F display options,
3.
Press START _
to accept the changes and go back to user preferences
menu
display.
4.
Press CANCEL (_
when finished to get back to the standard oven display.
SETT)NGCONT)NUOUS BAKE OR t2 HOURENERGYSAV)NG
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut
offthe oven if the oven control is left on for more than 11 hours and 59 minutes. The oven
can be programmed to override this feature for Continuous Baking.
Changing between 12 hour energy saving and continuous bake
1.
Press USER PREF _
until you get to the E S menu page.
+
2.
Press hi or io to toggle the energy saving setting on and off.
3.
Press START _
to accept the changes and go back to user preferences
menu
display.
4.
Press CANCEL (_
when finished to get back to the standard oven display.

Advertisement

Table of Contents
loading

Table of Contents