Network Projector (Emp-1825) - Epson EMP EMP-1825 User Manual

Network Projector (EMP-1825)

You can connect projector and computer via a network using either
"EMP NS Connection" supplied with the projector or "Network
Projector" function provided with Windows Vista.
The "EMP NS Connection" application provides a wide range of
features for use in meetings and presentations, such as the
distribution function, multi-screen display, movie sending mode, and
presentation mode. sEasyMP Operation Guide
The "Network Projector" function of the OS can identify and use a
network-connected projector without the need to install an application.
Internet
Windows:Vista Basic/Vista Home Premium/Vista Business/
Vista Enterprise/Vista Ultimate
LAN
From your computer, you can select a
network-connected projector to use.
Supported OS
When the projector is connected to a computer over a network, you
can project an image stored on the computer by means of the
following procedure.
Procedure
A
Turn on the power to the projector.
Using the remote control
B
Click "Start" on a computer.
C
Click "All Programs" - "Accessories" - "Network
Projector".
The connection setting screen is displayed.
You can now either identify the projector by inputting its IP
address, or allow the OS to automatically identify all of the
connected projectors. Once the OS has identified all of the
connected projectors, select the one that you want to use.
You are now prompted to enter the projector password. Input the
"Projector keyword," shown at the bottom of the EasyMP standby
screen. s p.50
100
Using the control panel