Diagnostic Indicators - Dell PowerEdge EL Owner's Manual

Option Description
MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name Displays the name of the Host, Model, or User String for the system
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watts. The display format can be
configured in the Set home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be
configured in the Set home submenu of the Setup menu.

Diagnostic Indicators

NOTE: The diagnostic indicators are present only on PowerEdge R720xd.
The diagnostic indicators on the system front panel display error status during system startup.
NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a working
power source and press the power button.
The following section describes system conditions and possible corrective actions associated with these indicators:
Health indicator
Condition
If the system is on,
and in good health,
the indicator lights
solid blue.
The indicator blinks
amber if the system
is on or in standby,
and any error exists
(for example, a failed
fan or hard drive)
Hard-drive indicator
Condition
The indicator blinks
amber if a hard drive
experiences an
error.
14
Corrective Action
None required.
See the System Event Log or system messages for the specific issue.
Invalid memory configurations can cause the system to halt at
startup without any video output. See
Corrective Action
See the System Event Log to determine the hard drive that has an
error. Run the appropriate Online Diagnostics test. Restart system
and run embedded diagnostics (ePSA). If the hard drives are
configured in a RAID array, restart the system and enter the host
adapter configuration utility program.
Getting Help.