Commencing Projection - Epson EMP 8100NL Owner's Manual

Commencing projection

1
Press the [Power] button to turn on the power supply.
The Operation Indicator will begin to blink in green, and projection will be started.
Power
The Operation Indicator blink and then be illuminated in green after approximately thirty
seconds.
Point
Button operations are not possible when the Operation Indicator is blinking in green.
40 - Projection
Power
Menu
Help
Computer Video
A/V mute
Keystone
Resize
Shift Volume
A message stating [No image
signals input] will be displayed
when no image signals have
been input.
(Depending on the setting,
this may not be displayed.
(see page 67))
Esc
Power
Set the R/C ON OFF switch to [ON] first of all
when using the remote control unit
Blinking in green → Illuminated
Power
Freeze
A/V Mute
R/C ON
E-Zoom
OFF
3
Enter
Esc
Operation Indicator