Installation Procedure; Installation Example - Epson EMP 8100NL Owner's Manual

Installation Procedure

Determines the projection angle and projection distance to ensure the most suitable screen
display.
· Do not block the ventilation outlet at the back of the projector or the Air Filter (suction
inlet) on the rear panel.
· There are cases where material or paper get sucked onto the Air Filter on the rear panel
when the projector is in use, so attention must be paid to prevent this.
· Do not place the projector in a location where it is subject to the direct air flow from air con-
ditioners or heaters.
· When the projector is to be placed near a wall, ensure that there is at least 20cm of space
between the wall and the projector.
· Do not cover the projector with table cloths or other material.

Installation example

The projector may be installed in locations that conform to the installation conditions and pro-
jection methods.
Viewing projected images from the front
Viewing projected images from the front with a ceiling suspended projector
Use the optional ceiling suspension unit and set the ceiling suspension parameter to [ON]. (see
page 69)
Viewing images projected onto half-transparent screens from the rear
· Set the rear parameter to [ON]. (see page 69)
· Ceiling suspension is also possible with the use of the optional ceiling suspension unit.
22 - Installation Procedure
Caution