Resetting The Lamp Timer - Epson ELP-3500 User Manual

7.
8.
9.
Make sure the lamp cover is securely fastened. The projector turns
itself off if the lamp cover is open.

Resetting the lamp timer

After changing the lamp, you need to reset the lamp timer as follows:
1.
2.
3. After status lights 1, 2, and 3 flash ON and OFF at least 3 times,
Gently insert the new lamp by lowering it into position. Make sure
it is inserted securely.
Tighten the screws you loosened in step 5.
Replace the lamp cover and tighten the cover screws.
Make sure the projector is turned off.
While holding down the projector's Comp Sync + and Comp
Tracking + buttons, Press and hold down the Power button.
release the Comp Sync +, Comp Tracking +, and Power buttons.
The flashing status lights indicate that the lamp timer is reset.
Replacing the Lamp
47