Using the SETTINGS Screens
Computer image SETTINGS screen
34
3
Using the Menus
l
The SETTINGS screen shows you the control panel settings (see
page 26) currently in effect for the selected image source (computer or
video). To display a SETTINGS screen, highlight the SETTINGS
option on the main menu; then press the right arrow on the control
panel or the right side of the remote control pointer button.
A sample SETTINGS screen for each image source is described below.
SETTINGS
TRACKING
SYNC
VOLUME
PRESET
LAMP
Current input signal resolution: 800
640
480 mode, the SETTINGS screen does not display the mode
x
setting.)
Computer tracking setting: +100 (range of available settings: -120 to
+120)
Computer sync setting: +10 (range of available settings: 0 to +30)
Volume setting: +10 (range of available settings: 0 to +30)
Selected projector setup: 1 (See page 38 for more information.)
EXIT
800X600 MODE
+ 1 0 0
+
1 0
+ 1 0
1
1000 H
6 0 0 (When the projector is in
x