Download Print this page

Kenmore 625.382080 Owner's Manual page 17

Central water whole home filtration system
Hide thumbs Also See for 625.382080:

Advertisement

POWER OUTAGE
MEMORY
If electrical power to the Central Water Whole Home
Filtration System is lost, "memory" built into the con-
troller circuitry will keep all settings for up to eight
hours, While the power is out, the display is blank and
the Central Water Whole Home Filtration System will
not Clean Rinse,
When electrical power is restored, you have to reset
the time of day only if the display is flashing.
The
Clean Rinse TIME never requires resetting unless a
change is desired.
Even if the clock is incorrect after a
long power outage, the Central Water Whole Home
Filtration System works as it should to keep your water
treated.
However, Clean Rinse cycles may occur at
the wrong time of day until you reset the clock to the
correct time of day.
NOTE: If the Central Water Whole Home Filtration
System was in a Clean Rinse cycle when
power was lost, it will now finish the cycle.
VACATIONS
AND EXTENDED
PERIODS
OF
NO WATER USE
If your Central Water Whole Home Filtration System
will not be used for an extended period of time (sever-
al months), please follow one of these recommenda-
tions:
If the water supply to the unit is not turned off, and
the automatic Clean Rinse function has not been
disabled, then no further actions are required.
The
Central Water Filtration System will clean itself
every 14 days if no water has run through it.
If you do not want Clean Rinse cycle to be running
automatically while you are gone, it is recommend-
ed that you unplug the Central Water Whole Home
Filtration System and either shut off the water sup-
ply or place the bypass valve(s) into the bypass
position.
If the Clean Rinse cycle cannot be automatically
run, due to the water supply being shut off, the
transformer being unplugged or the automatic
Clean Rinse function being disabled, then it is rec-
ommended that a minimum of 2 manually initiated
Clean Rinse cycles be performed when the system
is placed back into operation (see Start a Clean
Rinse Cycle section on Page 14).
In any installation where there is a possibility of
freezing, the Central Water Filtration System should
be disconnected and the water drained (see Protect
the Central Water Whole Home Filtration System
from Freezing section on Page 18).
Questions?
Call The Kenmore
Water Line 1-800-426-9345
or visit KenmoreWater.com
17

Advertisement

loading

This manual is also suitable for:

Elite 625.382080