Front Panel Header - Zotac X58 User Manual

Intel X58 Motherboard

Front Panel Header

The front panel header on this motherboard is one connector used to connect the
following four cables
PWRLED
Attach the front panel power LED cable to these two pins of the connector. The Power
LED indicates the system's status.
FP1 Pin
10
KEY
8
GND
4
2
FP1
1
Note: Some chassis do not have all four cables. Be sure to match the name on
the connectors to the corresponding pins.
PWRSW
Attach the power button cable from the case to these two pins. Pressing the
power button on the front panel turns the system on and off rather than using the
power supply button.
HD_LED
Attach the hard disk drive indicator LED cable to these two pins. The HDD
indicator LED indicates the activity status of the hard disks.
RESET
Attach the Reset switch cable from the front panel of the case to these two pins.
The system restarts when the RESET switch is pressed.
18
9
NC
7
RESET
5
GND
3
1