Multi-Function Display - Yamaha FJR13AV(C Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Multi-function display

3
1. Multi-function display
2. "SELECT" button
3. "RESET" button
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
The multi-function display is equipped
with the following:
G an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
EAU40290 a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
G a clock
G a fuel meter
G
a coolant temperature meter
G
a transmission gear display
G
an ambient temperature display
G
a fuel consumption display (instan-
taneous and average consumption
functions)
G
a self-diagnosis device
NOTE:
Be sure to turn the key to "ON" before
EWA14430
using the "SELECT" and "RESET" but-
tons.
Odometer and tripmeter modes
1. Odometer/tripmeter/fuel reserve tripmeter
2. "SELECT" button
3. "RESET" button
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
NOTE:
When selecting "TRIP 1" or "TRIP 2",
the display flashes for five seconds.
When approximately 5.5 L (1.45 US
gal) (1.21 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "F-TRIP" and start counting the
3-4