Advertisement
ALIGNMENT-TO
USE LEVELWITH TRIPOD (Figs. 10, 11 and 12)
This level can be used with a tripod 9-48278
(sold separately)
to project a beam for level
up to 300-ft. away. This feature is perfect for home improvement
projects
such as aligning
pictures, chair rails and other wall fixtures,
plumbing
runs, and many other uses.
,,
.
4_
Adjust the tripod to true level, using the
bubble vial on the base of the tripod.
Adjust the height of the laser line
you want to project,,
Screw the level to the tripod using the
1/4-in. threaded
hole located in the
center of the working
surface of the
level (see Fig. 10)o
Make any final adjustments
to tripod
and level to find the true level point.
This will be at 0 ° on the LCD display
screen and, if activated,
the beeper
will beep,.
Fig. 10
1/4-in.
Tripod Hole
Fig, 11
13
Advertisement
